Loading

图片关键词

热流道熔喷模具 VS 传统“衣架式”模具

▲ 生产周期快,热流道替代传统“衣架式”,缩短成型制件周期。

Fast production cycle time, instead of the traditional "Hanger Type", shorten the molding cycle time.

▲ 降低材料标准,传统“衣架式”需要整块板抛光,对钢材材料要求高,而热流道系统则大大降低对钢材的要求。

Reduce the material, the traditional "Hanger Type" requires a whole plate polishing, which requires high steel materials, while the hot runner system greatly reduces the requirements for steel.

▲ 进胶平衡,热流道采用内部几何平衡设计,相比传统“衣架式”,热流道有更好的平衡。

Inlet balance, the hot runner adopt internal geometric balance design, compared with the traditional “Hanger Type”, the hot runner system has a better balance.

▲ 压力均衡,热流道采用多层流道设计,通过不同的路径进行分流,这种模式可以使送料压力更均衡。

Pressure balance, the hot runner is designed with multi-layer runner, which is divided by different paths. This mode can make the feeding pressure more balanced.

▲ 温度均衡,热流道板上的加热装置,可使原料温度始终处于一个稳定的状态,避免喷丝过程中,因温度失衡而导致的累积性堵孔问题。

Temperature Balance, the heating device on the hot runner plate, can keep the temperature of raw material in a stable state all the time, and avoid the cumulative plugging problem caused by temperature imbalance in the process of silk blowing.


占瑞热流道熔喷模具(10点)

图片关键词

图片关键词

图片关键词


占瑞热流道熔喷模具(14点)

图片关键词

图片关键词

图片关键词

图片关键词

法律声明:

本网站登载的文章、照片、声音、录像、图画、图表及其他信息内容,

除部分内容系与明确注明之者或信息提供者与网页相关的资料提供者共同享有著作权或共同享有明示活默示的使用授权外,

其全部著作权均依法归属于本网站及本公司,

禁止任何单位或个人未经书面授权进行复制、变造、剽窃、抄袭、转载、翻译、分发或非法使用。

沪ICP备05057637号-1


销售经理